Activated carbon adsorber air filter

1.activated carbon adsorption tower product introduction:

Activated carbon filter purification tower can also be called activated carbon adsorption tower, activated carbon adsorption device, activated carbon waste gas treatment equipment, activated carbon adsorber, activated carbon equipment. Activated carbon filter purification tower is often used for: all kinds of organic waste gas treatment, especially spray paint waste gas treatment, ink waste gas, solder waste gas, plastic plastic waste gas should be the most widely used.

Activated carbon is often used for gas adsorption, separation and purification, solvent recovery, sugar liquid, oil, glycerin, drug decolorization agent, drinking water or refrigerator deodorant, gas mask filter agent, can also be used as a catalyst or metal salt catalyst body.

When the organic waste gas is powered by the fan, positive or negative pressure enters the activated carbon adsorption tower body, because there is an unbalanced and unsaturated molecular gravity or chemical strength on the solid surface of the activated carbon, when the solid surface is in contact with the gas, it can attract the gas molecules, so that it is concentrated and maintained on the solid surface, and the polluting substances and odors are absorbed. After the waste gas is adsorbed by activated carbon, the purified gas is discharged to the standard at high altitude.

2.activated carbon adsorption tower working principle:

The organic waste gas is powered by the fan, and the positive or negative pressure enters the activated carbon adsorber, the waste gas contacts with the activated carbon with a large surface porosity, and the pollutants in the waste gas are adsorbed, so that it is separated from the gas mixture and plays a purification role.

3.activated carbon adsorption tower equipment structure

ZR series activated carbon filter purification tower product features:

① The activated carbon adsorption unit is installed in a hierarchical drawer inside the equipment box, which can be easily removed from the inspection doors on both sides.

② The inspection door is easy to open and tightly sealed. It can be opened separately and removed separately.

③ The base frame is made of channel steel. The strong base frame can ensure the requirements of equipment installation and transportation.

④ The inlet (outlet) air port is a flanged interface, which can be connected to the air duct. Size, position and direction can be arranged according to actual requirements. For example, the top or side of a box.

⑤ Dusty organic waste gas needs to be pretreatment equipment before entering the activated carbon adsorber to purify the standard discharge.

The activated carbon adsorption equipment can be selected according to different exhaust gas properties of different materials: the main body can be selected stainless steel, carbon steel, galvanized sheet, PP plate, etc.

4.activated carbon filtration and purification tower description

Activated carbon is a black powder, granular or pellet form of amorphous carbon with porosity. The main composition is carbon, but also contains a small amount of oxygen, hydrogen, sulfur, nitrogen, chlorine. It also has a fine structure like graphite, but the grains are small and the layers are irregularly stacked. It has a large surface area (500 ~ 1000㎡/ g). It has a strong adsorption capacity and can adsorb gases, liquids or colloidal solids on its surface. The adsorption of gas and liquid can be close to the quality of activated carbon itself.

The adsorption is selective, and non-polar substances are more easily adsorbed than polar substances. In the same series of substances, the higher the boiling point of the substance, the easier it is to be adsorbed, the greater the pressure, the lower the temperature, the higher the concentration, the greater the adsorption capacity, on the contrary, the decompression and warming of favorable gas desorption.

5.activated carbon filtration purification tower scope of application:

Activated carbon filter purification tower is mainly used in: all kinds of organic waste gas purification, especially spray paint waste gas treatment, ink waste gas, solder waste gas, plastic waste gas should be the most widely used.